AireRyder LK30304RBZ Bedienerhandbuch PDF herunterladen

Fig.1

Motor

Switch Box

White Wire

Ridged Wire

Hex Nut

Screw

Switch Box Cover

Nipple

Light Kit

Black(Blue Wire)

Wire Nut

Smooth Wire

Washer

Center Plug

1. Remove the switch box cover from the switch

box of the fan by loosing the three screws.

2. Unscrew the center plug from the switch box

cover and discard it.

3. For fan as Fig.1: Attach the nipple of the light kit to the hole of the switch box cover. Thread

the wires through the washer and hex nut, then secure them tightly.

4. For fan as Fig.2: Unscrew the cap screw to remove the cap from the light kit, then secure it

upward to the switch box cover using the set screws (6x32 20mmL). Thread the wires of the

light kit through the cap and switch box cover. Attach the light kit to the cap using the cap

screw.

5. Pull out the outlet wires from the switch box. Make wire connections using the wire nuts:

---The smooth (marked) wire from the light kit to the blue wire from the fan.

---The ridged (unmarked) wire from the light kit to the white wire from the fan.

---Carefully tuck the wires back into the switch box cover.

6. Restore the switch box cover back to the switch box using the three screws.

7. Attach the glass shades upward to the glass holders, then secure them with the socket rings.

(See Fig.3)

8. Install bulbs (not included). See relamping label at socket area or packaging for maximum

allowed wattage.

Turn on the power at the main fuse or circuit breaker box

(You can control the lights with the pull chain.)

LK30304 --- Page 1

(6 x 32 20mmL)

Set Screw

Cap

Fig.2

Screw

Wire Nut

Smooth Wire

Cap Screw

Motor

Switch Box

White Wire

Terminal (Groove)

Terminal ( Tongue)

Ridged Wire

Switch Box Cover

Fixture

Nipple

Fig.3

Motor

Glass Holder

Glass Shade

Socket Ring

Pull Chain

For Light Kit:

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT

BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. The combined weight of your ceiling fan and light kit cannot exceed 35 pounds unless

additional support is provided for the fan.

LK30304

070424

1 2

Inhaltsverzeichnis

Seite 1 - INSTRUCTIONS

Fig.1MotorSwitch BoxWhite WireRidged WireHex NutScrewSwitch Box CoverNippleLight KitBlack(Blue Wire)Black(Blue Wire)Wire NutSmooth WireWasherCenter Pl

Seite 2 - For Chandelier:

1. Take out the cap from the hardware package for chandelier. 2. Thread the fixture wires through the cap, washer and stem. 3. Attach the cap and

Kommentare zu diesen Handbüchern

Keine Kommentare

AireRyder LK30304RBZ Bedienerhandbuch

Stöbern Sie online oder laden Sie Bedienerhandbuch nach Haushaltsfans AireRyder LK30304RBZ herunter. AireRyder LK30304RBZ Instructions / Assembly Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Haushaltsfans AireRyder LK30304RBZ